Products
The analyzer can measure blood pressure through external registered and certified electronic sphygmomanometer, and display the blood pressure measurement results on the LCD screen.
Blood pressure measurement
The analyzer can measure blood pressure through external registered and certified electronic sphygmomanometer, and display the blood pressure measurement results on the LCD screen.
Physical precautions:
1、Don't talk and don't move your body and arms during measurement.
2、When using the sitting position, it is best to put your arms on the table to make the sphygmomanometer level with your heart.The tightness of the arm strap should be moderate. You can refer to the gap between the arm strap and the arm measured by the hospital.
3、It is best to measure every day at the same time and with the same arm.
4、Take 3-5 deep breaths before measurement.
5、Rest for 5 minutes before measurement.
6、Do not eat, smoke, exercise or take a bath within 30 minutes before measurement.
7、Room temperature reference 25 ℃.
8、It can be measured for many times, and the mobile phone screen capture record is used as a reference, with an interval of 3 minutes each time
Equipment precautions:
1、The sphygmomanometer has a Bluetooth connection light and a status indicator.
2、The status indicator flashes in blue when the device is turned on, and the blue is always on after the device is connected.
3、When charging, the status indicator light yellow is always on, indicating that it is charging, and green is always on, indicating that it is full.
4、During measurement, the yellow flashing of the status indicator indicates that the voltage is low and the equipment needs to be charged, and the red flashing indicates measurement error.
5、The charging power supply of the device is 5V / 1a, and the mobile phone charger or the USB port of the computer can be used.
6、The sphygmomanometer uses oscillographic measurement technology and is suitable for people over 15 years old.
Test Procedure
1、Remove the electronic sphygmomanometer attached to the analyzer and read the enclosed instructions in detail.
2、Press and hold the power switch of the electronic sphygmomanometer until it is powered on when the subsphygmomanometer is turned on, the indicator light is on.
3、Open the analyzer, select the "blood pressure" measurement icon in the main interface and click. The analyzer enters the blood pressure measurement interface.
4、Thread the left arm into the cuff and tighten one end of the cuff.
5、Click the "test" icon on the analyzer interface, and the electronic sphygmomanometer starts automatic inflation measurement.
6、After the measurement, the blood pressure measurement results will be displayed on the display screen of the analyzer.
底部版权信息
Copyright©2021 Lumigenex (Suzhou) Co., Ltd. All Rights Reserved. Website construction: www.300.cn