Products
The PocRoc® SARS-CoV-2 Antigen Rapid Test Kit (Colloidal Gold) is used to qualitative detection of SARS-CoV-2 virus nucleocapsid protein, which is an important conserved structural protein of SARS-CoV-2 in human nasal samples. The detection of SARS-CoV-2 nucleocapsid protein antigen can be used to assist the diagnosis of novel coronavirus infection, and is helpful for the early detection of novel coronavirus pneumonia infection in the latent period.
The PocRoc® SARS-CoV-2 Antigen Rapid Test Kit (Colloidal Gold) is used for self-testing by layusers above 18 years old.
Children and adolescents of the age of 6~18 should need help by adults when testing. Adults over 75 years should also be supported by an assistant. Please do not use the test for children under 6 years old.
Intended use
The PocRoc® SARS-CoV-2 Antigen Rapid Test Kit (Colloidal Gold) is used to qualitative detection of SARS-CoV-2 virus nucleocapsid protein, which is an important conserved structural protein of SARS-CoV-2 in human nasal samples. The detection of SARS-CoV-2 nucleocapsid protein antigen can be used to assist the diagnosis of novel coronavirus infection, and is helpful for the early detection of novel coronavirus pneumonia infection in the latent period.
The PocRoc® SARS-CoV-2 Antigen Rapid Test Kit (Colloidal Gold) is used for self-testing by layusers above 18 years old.
Children and adolescents of the age of 6~18 should need help by adults when testing. Adults over 75 years should also be supported by an assistant. Please do not use the test for children under 6 years old.
Product Information
Production name |
Test samples |
Specifications |
PocRoc® SARS-CoV-2 Antigen Rapid Test Kit (Colloidal Gold) |
human nasal samples |
1T/Kit, 5T/Kit, 25T/Kit |
Storage Conditions
All reagents are ready to use as supplied. Unopened reagent kits are stable at 4°C ~30°C for 24 months tentatively. It should be used within 1 hour once the pouch is opened. Do not freeze the kit or expose the kit above 37°C during storage.
Test Procedure
1、Before starting the test, wash your hands with soap and water or use hand sanitizer
2、Open the package and take out the test card.
3、Place the extraction tube on the tube holder (not be included in 1 package/box). Open the The extraction reagent bottle and pour the reagent into the extraction tube.
4、Now follow the instructions for sampling, remove the swab from its wrapper.
Note: Rip the package at the end with the arrow label / OPEN.Make sure the tip of the tip is not touched.
Collecting Samples
5、Using the sterile swab provided in the kit, carefully insert the swab into one nostril of the lay user. The swab tip should be inserted up to about 2 cm until resistance is met.
6、Rub the swab around the inside wall of each nostril at least 5 times. Take approximately 15 seconds to collect the sample. This is done with the same swab.
Performing the Test
7、Put the swab specimen into the extraction tube with extraction reagent,
8、Rotate the swab for about 10 seconds, and press the swab head several times against the tube wall to release the antigen in the swab as possible as can. Discard the swab according to local regulations of biohazard waste.
9、Install the beater on the extraction tube, drop 80μL(three drops) into the sample well of the test card, and start the timer.
10、Read the result in 20 minutes. A strong positive result can be reported within 20 minutes, but a negative result must be reported after 20 minutes.
Warning: If the result is read after more than 30 minutes, the result may be invalid.
底部版权信息
Copyright©2021 Lumigenex (Suzhou) Co., Ltd. All Rights Reserved. Website construction: www.300.cn